Please scroll down to find your bug zapper by brand title and model sort and Zap Zone Defender Testimonial observe our directions on the best way to exchange your bug zapper globe. At no time are you ever to take away the hood or cage of the bug zapper to change the globe. This can then enable access to dwell parts and void warranty. Which is your Bug Zapper? Click the hyperlinks below to search out the instructions for Zap Zone Defender Setup that individual bug zapper. 1. Unplug your Bug Vac and Zap Zone Defender Setup remove from its mounting place. 2. Resting your Bug Vac on a steady floor Zap Zone Defender Setup remove the water draw from the trap. 3. Remove the lens by locating the hole at the base of the lens within the centre, use your fore finger and thumb to squeeze the empty drawer holder together and carefully slide a skinny metal object. 4. Gently angle the object behind the lens to raise the centre and Zap Zone Defender Setup release the left tab by sliding the lens to the right.
Repeat by sliding the lens to the left to launch the right tab. 5. Twist the globe to open the lamp holder to take away the lamp. 7. Twist the new globe into place to shut the lamp holder. 8. Replace the lens by inserting the left tab into its corresponding gap and repeat with the fitting tab. 9. Secure the lens by pushing it downwards, you'll feel it click into place. 10. Replace the drawer crammed with water and a number of other drops of detergent. 11. Plug your bug zapper into the power socket and the globe should gentle up. Following steps 1-5 verify the globe is safe within the lamp holder and exchange plastic cover. Use real yard guard substitute lamps in your bug zapper. When you've got followed these steps and your zapper still won’t gentle up, please contact us. 2. Holding your bug zapper, turn it the wrong way up so the hood is going through away from you.
3. Access the light by locating the lever within the centre of the bug zapper and pull together with your finger in direction of you. 4. The bulb cowl will open and you will have the ability to entry the alternative globe. 5. Gently pull on the globe to take away it from the lamp holder. 8. Replace plastic cover on the underside of the bug zapper and Zap Zone Defender Setup safe by once more pulling the lever in the direction of you after which releasing as soon as the cowl has closed securely. 9. Plug your bug zapper into the ability socket and the globe should mild up. Following steps 1-four verify the globe is safe in the lamp holder and exchange plastic cowl. If you have followed these steps and Official Zap Zone Defender your zapper still won’t light up, please contact us. 2. Holding your bug zapper, Zap Zone Defender Setup flip it the other way up so the hood is going through away from you. 3. Access the light by locating the lever in the centre of the bug zapper and pull together with your finger towards you.
4. The bulb cowl will open and Zap Zone Defender Setup you'll be capable to access the replacement globe. 5. Gently pull on the globe to remove it from the lamp holder. 8. Replace plastic cover on the underside of the bug zapper and Zap Zone Defender USA safe by once more pulling the lever in the direction of you and then releasing as soon as the cowl has closed securely. 9. Plug your bug zapper into the ability socket and the globe ought to light up. Following steps 1-four test the globe is secure in the lamp holder and replace plastic cowl. If you have followed these steps and Zap Zone Defender System your zapper still won’t mild up, please contact us. 2. Holding your bug zapper, turn it upside down so the hood is facing away from you. 3. Using a phillips head screwdriver remove the 2-three screws positioned on the underside of the bug zapper. 4. Remove the plastic cover sealing the bug zapper globe in place.